Function & Feature

1. Isolate the DC input signal from the DC Output signal, which is directly proportional to the input signal.

2. These isolators can be used to prevent earth loops, which occur when a measuring source

3. Excellent temperature characteristic and good working stability.

4. It have an advantage over loop powered units, in that if for any reason the output lead should become disconnected, the input will not be saturated.

5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.

Specifications

Inputs:

System input 0~75mV, 4~20mA, 0~1A, 0~5A, 0~10A

Absorbed power 0.1VA

Output:

Standard nominal outputs 4~20mA, 0-5V,

 (others on request) 0-20mA, 5-10V 0-10V

Responses time<350ms

Load Resistance

Current output: 0<Lr<0.6KA;

Voltage output: Lr>2KA

Overload:

 Current 2 times continuous,

20 times /1s Voltage 2 times continuous

Auxiliary Supply:

DC 12V/24V/48V AC 110V, 230/240V AC 20%,

1.5VA Isolation: Galvanic isolation between input,output circuits and auxiliary supply

Insulation Resistance >20MA (DC500V)

Test voltage 2KV RMS 50Hz for 1 minute

impulse 4KV 1.2/50Jsec waveform

Temperature: Operating -10~55C Storage -40~70C, 20 ~ 93%RH ; Noncondensing